BACK

Get Air Where it Needs to Go W/ Joey H.

Make & share a podcast clip

Keep the exact passage and a link to the full episode. Choose up to three minutes, with enough context to be fair to the speaker.

Preview uses this episode’s audio. Browser audio export, when supported, takes the length of the selected clip. Nothing plays until you choose Preview.

Joey Henderson joins the podcast to talk about airflow and how we can get air where it needs to go.

Duct design is one of the subjects that fuel Joey’s passion for HVAC. In many cases, people focus too heavily on the equipment when diagnosing airflow problems; sometimes, the equipment simply can’t perform as it should due to a poorly designed duct system. In residential HVAC, many duct systems aren’t adequately planned out, and the airflow can’t overcome restrictions like filters. We also need to keep in mind that flex ducts need to be as straight and tight as possible, and it’s usually best if we slightly upsize them (compared to sheet metal).

Even though balancing dampers aim to solve airflow problems, they often lead to other issues when installed and used incorrectly. In many cases, proper duct design would solve problems without the need for balancing dampers. Bypass dampers are also commonly misapplied.

Some technicians also aren’t properly trained to position their static pressure probes appropriately to measure total external static pressure, which leads to faulty readings and misinformed diagnoses. We can start by looking at things that can improve system performance at the equipment, like filtration; we can think of the equipment as the heart and the duct system as arteries (with static pressure as blood pressure), and the equipment also has the biggest pressure drop.

Joey and Bryan also discuss:

  • Joey’s HVAC beginnings in the Navy and current work in education
  • Educators’ unique communication styles
  • Learning from other educators as an educator
  • Plenum boxes and turbulence
  • Using wye fittings
  • Laminar flow
  • Modifying existing duct systems
  • Motors and amp draw
  • Building duct transitions
  • Clients and money limitations
  • Communicating with customers about airflow issues
  • Ethics around duct design
  • Unique duct challenges with inverter-driven systems

Check out Joey’s training, social media, and contact information at https://joejoehvac.com/.

Learn more about the HVACR Training Symposium or buy a virtual ticket today at https://www.hvacrschool.com/symposium.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Work through this with the trade.

Highlight a short passage, or bring a question about a specific moment into HVAC No Bull Forum.

Discuss this reference → Related forum discussions

Comments

Advanced Refrigerant Recovery: Best Practices for Diverse Systems and Environments
The A2L & Refrigerant Transition – Short #302
Invented For Techs, by Techs: Inside Refrigeration Technologies’ “The Lab”
The Ethics of IAQ – Testing vs. Remediation Conflicts – Short #301
Is 400 CFM per Ton Always Right? w/ Ty
The MERV 15 Filtration Physics – Short #300
Tips for Being On Call w/ Ty
The Florida “M-Word” – Legal Boundaries & Tech Communication – Short #299
Becoming a GRIT Host or Mentor w/ Leilani
Behind the Drywall – The Psychrometrics of a Hidden Moisture Failure – Short #298

Author:

The HVAC School site, podcast, and tech tips are
made possible by generous support from