BACK

Static Pressure is like Blood Pressure – Short #258

Make & share a podcast clip

Keep the exact passage and a link to the full episode. Choose up to three minutes, with enough context to be fair to the speaker.

Preview uses this episode’s audio. Browser audio export, when supported, takes the length of the selected clip. Nothing plays until you choose Preview.

In this short podcast episode, Bryan explains the science behind a common HVAC simile: static pressure is like blood pressure. He covers the similarities and differences between measuring static pressure during a service call or maintenance and a doctor measuring your blood pressure at a checkup.

Total external static pressure (TESP) should be measured every time you perform service or maintenance on a unit. The exact test port location will vary between air handlers and furnaces; the coil adds extra pressure drop in furnace applications. You need to pick a coil that has the lowest static pressure drop (same consideration as filters). Typically, the lower the pressure drop, the better. Make sure you use proper ports for static pressure testing when you do make those holes.

Static pressure isn’t airflow itself. It can help diagnose airflow issues or give indications, but it doesn’t measure the CFM. Static pressure is a balloon-type pressure exerted on the walls of the duct. Just as high blood pressure doesn’t mean your heart is pumping more blood than it should, a high static pressure doesn’t mean your blower is moving a lot of air; both can indicate restrictions.

You also don’t want an extremely low static pressure, either. It could indicate that airflow is weak, just like a very low blood pressure indicates that the heart isn’t pumping as it should. If you want to know your system airflow, you should use TEC’s TrueFlow grid. However, static pressure is particularly good at measuring trends so that you can see where the numbers deviate from the norm for each individual system.

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 7th Annual HVACR Training Symposium at https://www.hvacrschool.com/symposium.

Subscribe to our podcast on your iPhone or Android.

Subscribe to our YouTube channel.

Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android

Work through this with the trade.

Highlight a short passage, or bring a question about a specific moment into HVAC No Bull Forum.

Discuss this reference → Related forum discussions

Comments

Premature Coil Failure in Ductless Mini-Splits & VRF Equipment – Short #303
Advanced Refrigerant Recovery: Best Practices for Diverse Systems and Environments
The A2L & Refrigerant Transition – Short #302
Invented For Techs, by Techs: Inside Refrigeration Technologies’ “The Lab”
The Ethics of IAQ – Testing vs. Remediation Conflicts – Short #301
Is 400 CFM per Ton Always Right? w/ Ty
The MERV 15 Filtration Physics – Short #300
Tips for Being On Call w/ Ty
The Florida “M-Word” – Legal Boundaries & Tech Communication – Short #299
Becoming a GRIT Host or Mentor w/ Leilani

Author:

The HVAC School site, podcast, and tech tips are
made possible by generous support from