BACK

An IAQ & Dehum Case Study w/ Genry & Nikki

Make & share a podcast clip

Keep the exact passage and a link to the full episode. Choose up to three minutes, with enough context to be fair to the speaker.

Preview uses this episode’s audio. Browser audio export, when supported, takes the length of the selected clip. Nothing plays until you choose Preview.

Nikki Krueger and Genry Garcia return to the podcast to talk about a recent IAQ & dehumidification case study on a vintage home in Miami. The home was very clean but had a musty odor and VOC concerns. You can read the case study in the “Literature” section at https://www.santa-fe-products.com/about-us/media-resources/.

Blower door tests and ZPD revealed that the home was leaky, and the crawlspace was also not properly encapsulated. The options were to tighten the building and/or mitigate the problem by improving the HVAC system. The homeowners chose to improve the HVAC, which Genry did by installing a ventilating dehumidifier (Santa Fe Ultra98H), reducing system tonnage (3.5 to 2 tons), and putting in new ductwork.

One of Genry’s key tips to address intermittent moisture issues is to pay attention to fluctuating pressures, not just under the blower door test conditions. Ongoing monitoring is crucial in these studies to measure the home under several different typical conditions. He also relies on blower door tests to determine if encapsulation is necessary or needs improvement, as insulation and encapsulation can bring new issues in their wake.

Extensive testing and working with other contractors (such as home insulators) are the best ways to get a solution that makes the homeowner happy. We need a holistic approach to design to achieve a homeowner’s IAQ and comfort goals, not necessarily following strict design guidelines to a T.

Nikki, Genry, and Bryan also discuss:

  • Zonal pressure diagnostics (ZPD)
  • Dehumidifier ductwork
  • Dehumidifier selection
  • Attic encapsulation, condensation, and duct leakage
  • MAD AIR
  • The importance of IAQ case studies and the insights we can get from them
  • Effects of insulation
  • Dehumidifier performance in part-load conditions
  • Mechanical equipment design
  • Consulting the ACCA design manuals
  • Maintaining equipment and sustaining positive results
 

Read the associated tech tip at _.

Learn more about the 5th Annual HVACR Training Symposium at https://hvacrschool.com/Symposium24.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Check out our handy calculators HERE.

Work through this with the trade.

Highlight a short passage, or bring a question about a specific moment into HVAC No Bull Forum.

Discuss this reference → Related forum discussions

Comments

Premature Coil Failure in Ductless Mini-Splits & VRF Equipment – Short #303
Advanced Refrigerant Recovery: Best Practices for Diverse Systems and Environments
The A2L & Refrigerant Transition – Short #302
Invented For Techs, by Techs: Inside Refrigeration Technologies’ “The Lab”
The Ethics of IAQ – Testing vs. Remediation Conflicts – Short #301
Is 400 CFM per Ton Always Right? w/ Ty
The MERV 15 Filtration Physics – Short #300
Tips for Being On Call w/ Ty
The Florida “M-Word” – Legal Boundaries & Tech Communication – Short #299
Becoming a GRIT Host or Mentor w/ Leilani

Author:

The HVAC School site, podcast, and tech tips are
made possible by generous support from