Start Here

To answer the question in the title, we use it as a measurement of pressure. REALLY, it is a measurement of distance. First, any scale CAN be used to measure vacuum (negative pressure) and positive pressure. The trick is knowing which is best suited for which and the size of the scale. Larger units of […]

As we often do in these tech tips, we will start with the common and more practical explanation of saturation and then move to the more technical and nerdy explanation later. When we say “at saturation” or “saturated” in the HVAC/R trade, we are generally referring to the refrigerant that is in the process of […]

We may not realize it, but heat transfer inside our homes keeps the HVAC industry afloat. Without air conditioning in the summer, our buildings would remain stuffy, miserable places. That’s because heat can come from the outdoors, indoor objects (such as cooking appliances), and our bodies. So, this article will cover the three main types […]

I recently received a message asking for a discussion of relative humidity (RH), wet-bulb (WB), and dry-bulb (DB). Time and time again, I hear techs say that condensation occurs when “hot meets cold,” which may be true in some cases. However, that is only a shorthand way to describe it and doesn’t really address what […]

Heat is a byproduct of mechanical energy that presents itself as a temperature increase. French physicist James Prescott Joule aimed to equate heat to mechanical energy. Early experiments used paddle-like structures to stir water within a container and raise its temperature. The paddles would move and agitate the water whenever a mass on a pulley […]

Pioneers of refrigeration The modern world is impossible to imagine without refrigeration. The Internet, food transportation, medical imaging, and vaccine research all rely on refrigeration to function. Even the sprawl of cities across the American south in the 1950s was inconceivable without refrigeration and air conditioning. So, if you like vacationing in Vegas or taking […]

In HVAC systems, liquid and vapor will exist at the same time and place. We call that condition saturation, or we say that the refrigerant is “at saturation.” Phase changes occur in the evaporator and condenser, so these are spots where liquid and vapor coexist while the system is running. Saturated conditions occur whenever liquid […]