Customers buy Comfort-Why Matt Risinger uses dehumidification in his homes
Matt Risinger from the Build show on YouTube https://youtube.com/mattrisinger talks to Bryan about dehumidification in his homes and why he takes it so seriously.   –Bryan
Read more
Installing a Universal Digital Refrigeration Control Danfoss ERC 213
  In this video we provide an overview of universal digital controls, explain the ERC 213 and install it on a reach in a freezer as well as solve a few more problems along the way.     –Bryan
Read more
Open and Short Circuits Class
  This short video describes common open and short circuits in air conditioning and the difference as well as some discussion of tripping breakers and blowing fuses.     –Bryan
Read more
The Danger of Using Ground as a Reference
  This short video covers a common mistake techs make when they check voltage to ground.     –Bryan
Read more
Electrical Circuit Basics Part 3 – Resistance and Loads
  In part three we cover voltage measurement, loads and resistance in electrical circuits.     –Bryan
Read more
Setting Up the Testo 510 Manometer
  How to setup the Testo 510 out of the box to use it for checking static pressure and gas pressure in inches of water column.     –Bryan
Read more
Electrical Circuit Basics Part 2 – Intro to Ladder Diagrams
  Bryan covers more electrical basics, 240v circuits, 120v and 24v with the differences between L1, L2, Neutral, Common and Ground for HVAC/R and an introduction to schematics and ladder diagrams.     –Bryan
Read more
Replacing a Piston with a TXV Using the Danfoss TR6 Kit
  We show step by step how to install a TXV in place of a piston on a Carrier system using the Danfoss TR6 TXV kit.     –Bryan  
Read more
When Dew and Bubble Isn’t Enough – Refrigerant Glide Mid Point / Average Saturation Temperature
  High glide refrigerants (Zeotropic) cannot be charged and diagnosed like typical R22 or R410 (Near Azeotropic). In addition to De and Bubble point, we must also understand when to use average or mid point saturation.     –Bryan  
Read more

The HVAC School site, podcast, and tech tips are
made possible by generous support from