BACK

Bonus – The Case for Tamper-Resistant Caps w/ James Bowman (Podcast)

Make & share a podcast clip

Keep the exact passage and a link to the full episode. Choose up to three minutes, with enough context to be fair to the speaker.

Preview uses this episode’s audio. Browser audio export, when supported, takes the length of the selected clip. Nothing plays until you choose Preview.

James from Rectorseal talks about the IMC codes relating to tamper-resistant caps and why you may consider installing them now.

Tamper-resistant caps, also known as locking refrigerant caps, fit on refrigerant ports to prevent unauthorized access. Even though these caps can RESIST attempts to tamper with the equipment, they are not (and cannot be) fully tamper-proof.

Many new construction companies used to put the caps on ONLY to pass inspection; they then take the caps off to reuse them several times. That’s an inhalant abuse risk, and it’s also a liability issue for other contractors who service the equipment. So, the IMC requires locking-type, caps to be fastened to the equipment after charging or recovery. Unfortunately, it’s impossible to enforce the code, even as it currently stands.

Moreover, many technicians want manufacturers to make their equipment easier to service. Components like tamper-resistant caps make it harder to service equipment. Almost no standard tools can remove those caps, and you will need special tools for tamper-resistant cap removal. The code, however, does not define what a “tamper-resistant” cap is; a key could fall under that umbrella.

However, tamper-resistant caps are still worth considering because they prevent inhalant abuse. Inhaling refrigerants is a gateway for harder drugs, including heroin. Even though tamper-resistant caps may not stop adolescents from doing drugs at all, we remove our industry from that controversial subject. It is also a good idea to give your system caps that make it harder for people to steal refrigerant, especially as refrigerant prices rise.

James also discusses:

  • The purpose of code commentary
  • Inhalant abuse prevention
  • Code compliance
  • Built-in vs. added components required by code
  • IMC vs. AHD
  • Explaining tamper-resistant caps to customers

Check out Rectorseal’s Novent refrigerant caps HERE.

If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE.

Work through this with the trade.

Highlight a short passage, or bring a question about a specific moment into HVAC No Bull Forum.

Discuss this reference → Related forum discussions

Comments

Why Every HVAC Company Needs a Home Performance Contractor – Short #312
Deliver High Performance Heat Pump Retrofits w/ David Richardson
Did You Actually Test Every Heat Strip – Short #311
Uncovering the Root Causes of Commercial Refrigeration Failures
Why and How to Test Heat Pump Defrost – Short #310
Building a Business That Lasts: Why Culture Beats Strategy in HVACR w/ Tony Gonzalez
Tight Enough to Fail – Short #309
Glycol Skids for Market Refrigeration w/ Max Johnson
Your Thermostat Is Reading the Wall – Short #308
Next-Gen Filtration – Pressure Drop, MERV 16, and Bypass Prevention w/ Chris Howells

Author:

To continue you need to agree to our terms.

The HVAC School site, podcast, and tech tips are
made possible by generous support from