HVAC technicians typically focus on diagnosing issues related to mechanical wear, refrigerant leaks, or control problems within the equipment. However, damage can also originate from external sources. For instance, a failed control board might be attributed to internal shorts or rubouts. Yet, the root cause could be external, such as the voltage spike that can […]

If you have a multimeter for HVAC work, you most likely have a meter with a CAT III rating on it. Some might also be rated for CAT II at higher voltages or CAT IV at lower ones—or both, like this model of the UEi DL599 from our Multimeter 101 for HVAC 3D video. In […]

Equipment selection may seem like a pretty straightforward process: look at the data plate, find the tonnage that’s close to your Manual J calculation’s total load, and you’re good to go, right? The problem with that approach is that a 3-ton unit won’t deliver 36,000 BTUs per hour like it says on the data tag. […]

 In this engaging episode of the HVAC School Podcast, host Bryan sits down with Jesse from NAVAC to dive deep into the evolving landscape of refrigeration technology, focusing primarily on the transition to A2L refrigerants. The conversation offers a refreshingly pragmatic approach to addressing industry concerns about these new, mildly flammable refrigerants, dispelling myths […]

In this episode of the HVAC School podcast, host Bryan and guest Jesse Stewart from NAVAC discuss the generational divide in the HVAC industry and the importance of embracing new technologies and processes. They explore the challenges faced by both experienced technicians who may be set in their ways and newcomers to the trade who need […]