#compressor failure

Tech Tips:

Anytime we have a compressor failure, we can’t just pull out the bad compressor and drop a new one in. We have to put our detective hats on and find the culprit so that it doesn’t happen again. In many cases, acid is a prime suspect. Whenever there’s acid in the system, the next compressor […]

Common Causes of Compressor Failure

This article was written by Don Gillis, the technical training manager at Chemours. Thanks, Don! Refrigerant compressors are essential components of air conditioning and refrigeration systems, as we all know. They work by compressing refrigerant vapor, which then flows through the system and changes state as pressure and temperature conditions rise and fall. Unfortunately, these […]

How To Properly Inspect a Failed Compressor

NOTE: If you cannot view the recording, the video may still be processing. The maximum wait time is 24 hours. We apologize for the delay and appreciate your patience.

Compressor Teardown

NOTE: If you cannot view the recording, the video may still be processing. The maximum wait time is 24 hours. We apologize for the delay and appreciate your patience.

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

In this comprehensive episode of the HVAC podcast, Bryan hosts an in-depth discussion about dehumidification technologies with two industry experts: David Schurk, National Sales Manager for Innovative Air Technologies, and Nikki Krueger from Santa Fe Products. The conversation explores the fundamental differences between compression refrigeration dehumidification and solid desiccant systems, providing valuable insights for HVAC professionals dealing with moisture control challenges.

David Schurk brings 44 years of industry experience and serves as an ASHRAE Life Member and Distinguished Lecturer, teaching humidity control professional development courses. His expertise focuses on solid desiccant dehumidification systems for industrial and heavy commercial applications. Nikki represents Santa Fe Products, pioneers of whole-house ventilating dehumidification technology since the mid-1990s, and discusses the growing residential and light commercial market demands driven by tighter building construction and stricter energy efficiency requirements.

The discussion delves into the critical importance of understanding dewpoint versus relative humidity measurements, a fundamental concept that often confuses technicians in the field. The experts explain how the dew point remains consistent throughout a space while relative humidity can vary dramatically based on temperature differences between rooms, floors, and ceilings. This understanding is crucial for proper system design, troubleshooting, and customer education, especially as homeowners become increasingly aware of indoor air quality concerns.

The conversation also addresses the intersection of building science and dehumidification technology, emphasizing that proper moisture control requires both well-designed building envelopes and appropriate mechanical systems. From residential applications dealing with tighter construction and mechanical ventilation requirements to industrial processes like lithium battery manufacturing requiring extremely low humidity levels, the experts highlight how different technologies serve specific market segments while sometimes overlapping in commercial applications.

Key Topics Covered

Fundamentals of moisture control
Compression refrigeration dehumidification
Solid desiccant technology
Market applications and demand drivers
Building envelope importance
Measurement and troubleshooting
Water activity levels and mold prevention
Technology boundaries
Energy considerations
Installation challenges

Learn more about Santa Fe’s products at https://www.santa-fe-products.com/, and learn more about David’s work at https://www.dehumidifiers.com/. Both David Schurk and Nikki Krueger are active on LinkedIn, too.

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 6th Annual HVACR Training Symposium at https://hvacrschool.com/symposium.

Subscribe to our podcast on your iPhone or Android.

Subscribe to our YouTube channel.

Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android

Search Episodes

Cold Coil vs. Desiccant Dehumidification

06/26/2025

Bryan Orr

Learning Better – Short #246

06/24/2025

Bryan Orr