# Tag: blends

## What is the “Mid Point” of a refrigerant blend

As we have mentioned in several previous articles, many blended refrigerants have glide, which simply means they boil and condense over a range of temperatures instead of just one temperature.

As an example consider refrigerant R407c, it is a zeotropic blend which means it has enough glide that it makes a big difference if you fail to take it into account.

For example, on an evaporator coil running R407c the refrigerant leaving the TXV will begin boiling at the bubble point, let’s say that the pressure in the evaporator is 80 PSIG that bubble temperature will be 40°.

Now as the refrigerant continues boiling the temperature will begin increasing towards the Dewpoint which is 50.8°. Any temperature gained ABOVE 50.8° on a R407c system at 80 PSIG is superheated, meaning the refrigerant is completely vapor.

So we calculate superheat as temperature above the dew point and subcool as temperature below the bubble point and the condensing temperatures and evaporator temperature aren’t fixed but they GLIDE between the bubble and dew and back again when the refrigerant is changing state.

But what does this mean for evaporator and condensing temperatures when calculating target head pressure (condensing pressure) and suction pressure (evaporator pressure) also known as evaporator TD and condensing temperature over ambient?

The simplest way is to use the midpoint between the dew and bubble points to calculate CTOA and DTD.

In the case above you would simply calculate 50.8° + 40° = 90.8 | 90.8 ÷ 2 =  45.5° average evaporator temperature or midpoint

Emerson points out that evaporators would be better calculated using 40% of bubble and 60% of dew but the extra complexity generally doesn’t make enough difference to mention.

I made this video to demonstrate further

— Bryan

Scroll to top
Translate »

### Daily Tech Tip

Get the (near) daily Tech Tip email right in your inbox!