Most techs and installers know that drains need to be pitched. I use the rule of thumb that drain lines should generally be pitched 1/4″ per foot of horizontal run. One thing that can easily be forgotten in pitching wall penetrations when drilling. It’s as simple as drilling with a slight upward angle if drilling from the outside or slightly downward from the inside. The goal is to have the outdoor side lower than indoors both to assist in draining system condensate and to prevent exterior moisture from running into the building. You will also want to make sure that the drain doesn’t get run on top of copper, or go up and down for any other reason. This is especially common in Ductless systems with flexible drains. Keep that pitch moving the right direction from start to finish and all will be well. — Bray.
- Tech Tips