#wire sizing

HVAC work is never just “HVAC” work. One minute you're brazing copper, and the next you're troubleshooting a blown fuse in a disconnect or running a new whip to a condenser. Because our trade is so varied, you never know what you're going to find when you open a service panel or crawl into an […]

 In this essential episode, Bryan Orr sits down with Elliot, the residential install supervisor at Kalos Services, to unpack a critical issue that's causing confusion among HVAC technicians, electricians, and inspectors alike: the new standards for breaker and conductor sizing on inverter-driven equipment. The conversation was sparked by Elliot's frustrating experience of having two […]

 In this short podcast episode, Bryan drops some knowledge to help with understanding voltage drop, a few different causes of it, and NEC recommendations. Voltage is electrical potential or “pressure,” and voltage drop is the reduction in electrical potential energy. We often think of it happening across conductors (which add resistance), but it also […]

 This podcast episode is of Bryan's session from the HVAC School Symposium, “10 Things I've Learned in the Last 10 Years.” Delivered as HVAC School approaches its 10-year milestone and Kalos hits 20 years, Bryan blends technical know-how with personal stories, revealing how his “expertise” is a product of constant learning—often from the very […]

 In this short podcast episode, Bryan and Mike from DITEK talk about what to do in tricky electrical scenarios, such as when the MCA is 27 and you have a 50A breaker. When you size an HVAC system for compatibility with voltage monitors, like the DITEK Kool Guard, you need to pay attention to […]

 In this short podcast, Bryan explains the history of AWG, or American wire gauge, which is the sizing system we use for conductors in the United States. Wires weren't standardized before the 18th century (1700s). As fencing, telegraph, and electrical wires started coming out, there was a need for a standardized system. In England, […]