BACK

#wiring diagram

Tech Tips:

Upgrading a Single-Pole Contactor with a SureSwitch: Using a Wiring Diagram

Along the path to becoming a great HVAC technician lies the dreaded wiring diagram. It's meant to be a helpful map of the equipment's electrical system, but with its crisscrossing lines and cryptic symbols, it often feels more like a barrier than a guide. If this sounds familiar, you're not alone. But what if you […]

Contactor Alternatives and Upgrades

Our HVAC equipment can’t run without the contactor coil, but contactors can develop problems with age and during high-voltage electrical events. Contact pitting is unmistakable, and it’s unfortunately all too common in areas where bugs can get into the coil and fry on the contacts. Factor in problems with the utility, such as brownouts and […]

Crankcase Heaters and Single-Pole Contactors

We keep two-pole, 40-amp 24v coil contactors on all of our vans. They are versatile and reliable, and you can replace most residential A/C contactors with them. There are a few things to watch for, though, especially when you have a crankcase heater. Many brands power the crankcase heater constantly and shut it on and […]

delzarate3
#crankcase heater #diagram #electrical #wiring diagram

Check out our most recent video

How to Evacuate an AC system, Full Vacuum Procedure

Our latest Podcast

HVAC School – For Techs, By Techs

Real training for HVAC ( Heating, Ventilation, Air Conditioning and Refrigeration) Technicians. Including recorded tech training, interviews, diagnostics and general conversations about the trade.

In this episode from the 6th Annual HVACR Training Symposium, Brynn Cooksey, a home performance contractor from Michigan and technical training business owner, reveals how indoor air quality (IAQ) testing transformed his contracting business from a commodity service into a profitable specialty. Cooksey shares his proven methodology for turning IAQ into an “instant profit center” by implementing systematic testing on every service call.

Cooksey opens with a striking reality check: according to the EPA, Americans spend 90% of their time indoors, yet indoor air quality is 2-5 times worse than outdoor air. This presents a massive opportunity for HVAC contractors, as he explains that consumers are already spending $10 billion annually on air quality products at big box stores – but they’re treating symptoms rather than addressing root causes. His approach involves educating contractors on how to position themselves as the solution providers rather than letting customers self-diagnose with retail products.

The presentation dives deep into six critical IAQ parameters that every contractor should measure: particles (especially dangerous PM 2.5), volatile organic compounds (VOCs), carbon dioxide, carbon monoxide, humidity, and temperature. Cooksey emphasizes his “test in, implement solution, test out” methodology, demonstrating how this systematic approach not only ensures customer satisfaction but also provides concrete proof of value delivered. He shares real-world examples, including a dramatic case where routine IAQ testing during a water heater service call revealed a cracked heat exchanger that could have been life-threatening.

The episode concludes with extensive coverage of ventilation strategies, which Cooksey calls the “silver bullet” for IAQ improvement. He walks through the differences between supply-only, exhaust-only, and balanced ventilation systems, strongly advocating for Energy Recovery Ventilators (ERVs) as the optimal solution. His practical approach includes using DOE’s free REDCalc tool for proper ventilation sizing and emphasizes the importance of controlled ventilation over relying on natural air leakage – debunking the myth that “houses need to breathe.”

Topics Covered

The IAQ Business Case: How testing indoor air quality on every service call creates new revenue streams and differentiates contractors in a commoditized market
Six Critical IAQ Parameters: Detailed explanation of particles (PM 2.5), VOCs, carbon dioxide, carbon monoxide, humidity, and temperature – what they are, how to measure them, and health impacts
Systematic Testing Methodology: The “test in, implement solution, test out” approach that provides measurable results and customer proof of value
Particle Control Strategies: Source control, enhanced filtration (MERV 13-16), duct cleaning benefits, and duct sealing with Aeroseal technology
Chemical and VOC Management: Understanding formaldehyde and benzene sources, proper storage techniques, and why PCO devices aren’t recommended
Carbon Monoxide Detection: The life-saving importance of testing every home, understanding chronic vs. acute exposure, and why standard CO detectors aren’t sufficient
Ventilation as the Silver Bullet: Comprehensive coverage of supply-only, exhaust-only, and balanced ventilation strategies, with strong emphasis on ERV systems
Practical Implementation Tools: Using DOE’s REDCalc tool for ventilation sizing, integrating IAQ testing into service calls, and customer communication strategies
Real-World Case Studies: Multiple examples of IAQ testing uncovering dangerous conditions, from cracked heat exchangers to improper combustion appliance installation
Building Science Integration: How IAQ testing leads to broader building performance improvements, including duct sealing, insulation, and equipment sizing corrections

Have a question that you want us to answer on the podcast? Submit your questions at https://www.speakpipe.com/hvacschool.

Purchase your tickets or learn more about the 7th Annual HVACR Training Symposium at https://hvacrschool.com/symposium.

Subscribe to our podcast on your iPhone or Android.

Subscribe to our YouTube channel.

Check out our handy calculators here or on the HVAC School Mobile App for Apple and Android

Search Episodes

IAQ for the HVAC Technician w/ Brynn Cooksey

08/14/2025

Bryan Orr

Bi-metal & Magnetic Switches – Short #252

08/12/2025

Bryan Orr