BACK
Liquid Line Solenoid Valves: Long Line Applications
Trades and the Skills Gap – A Manifesto
Using Power Factor to Check Capacitors Under Load
Using Power Factor to Check Capacitors Under Load
The 10 Commandments of the HVAC/R Technician
Storming the Gates to Trade Education
Electronic Leak Detection DOES WORK
Electronic Leak Detection DOES WORK
Introduction to Pool Heat Pumps
Q&A – Double Flares – Short #225
Can You Coat Fiberglass?
Redux – The Lost Art of Steam Heating w/ Dan Holohan
Q&A on Superheat – Short #223
Duct Cleaning – How Long & How Often?
Are EVs an Opportunity? – Short #222
Choosing HVAC Cleaners w/ Becca from Viper
Q&A – Evap Placement – Short #221
Can Ducts Be Cleaned Ethically?
#hvac
Tech Tips:
Pump down solenoid valves are commonplace for any refrigeration technician. They are energized with the compressor still running, shutting off flow in the liquid line so that the refrigerant is pumped into the condenser and receiver. The compressor will then shut off once a low-pressure switch opens the circuit when the pressure falls below a […]
Read more
This article is a year old, and I’m recycling it because it’s on my mind today. I had a fun conversation with Richard Trethewey on the podcast that has me thinking along these lines today. The link is HERE if the player isn’t showing up. I have a confession to make. I’m a bit of […]
Read more
Capacitors are traditionally tested with a capacitance meter (commonly found as a function within a multimeter), with the component taken entirely out of the circuit. “Bench testing,” as this method is referred to, is hands-down the safest method of checking capacitance in microfarads. All other methods require the capacitor to be wired into the circuit […]
Read more
Capacitors are traditionally tested with a capacitance meter (commonly found as a function within a multimeter), with the component taken entirely out of the circuit. “Bench testing,” as this method is referred to, is hands-down the safest method of checking capacitance in microfarads. All other methods require the capacitor to be wired into the circuit […]
Read more
One trait I’ve seen with good technicians is that they take their jobs VERY seriously, but they learn not to take themselves too seriously. A few months ago, I had someone tell me online that I must think I’m the A/C “god” because I’m always telling everyone the “right” way to do things. This got […]
Read more
Before we jump into the stuff that will make folks angry, let’s start with some common ground. Most of us can probably agree that the desired result of education in the trades is: Knowing what you are doing and doing it as safely, efficiently, and correctly as possible. If we can agree that we all […]
Read more
I hear many techs complain about the finicky and ineffective nature of electronic leak detection. So much so that some claim that it is a waste of time altogether. We recently located a leak inside the fins of a ductless evaporator coil—pinpointed to an exact spot—using an electronic leak detector. For demonstration purposes, we took […]
Read more
I hear many techs complain about the finicky and ineffective nature of electronic leak detection—so much so that some claim that it is a waste of time altogether. We recently located a leak inside the fins of a ductless evaporator coil—pinpointed to an exact spot—using an electronic leak detector. For demonstration purposes, we took that […]
Read more
Air-to-water pool heat pumps are seeing more and more popularity in the climates that can support them over the more traditional gas and electric pool heaters we usually see. While they definitely contain some familiar operating principles to an air-to-air heat pump, there are some striking differences in how the heat is transferred and how […]
Read more
Videos:
Podcasts:
In this short podcast episode, Bryan answers a listener-submitted question about double flares and their application in the HVAC/R industry. Flare connections are common in certain types of equipment, and they connect the copper to the appliance. As a result, when we make a flare, our goal is to make it leak-free. A regular […]
Read more
In this episode of the HVAC School Podcast, Bryan interviews Zach about duct coatings and their applications in HVAC systems, particularly focusing on the Hardcast RE500 product. The discussion delves into the importance of proper duct coating applications and their benefits for both contractors and customers. Zach, who has extensive experience in duct cleaning […]
Read more
In today’s podcast, Bryan talks with legendary Hydronics author and trainer Dan Holohan about the history of steam heating and some practical applications of old ideas. Recently, Dan has been working on more novels, having published two of them over the past few months. Steam heating is a “lost art” nowadays; it has become […]
Read more
In this short Q&A podcast episode, Bryan answers a listener-submitted question about superheat, including what it is and how we measure it. Superheat is the number of degrees a refrigerant is above its saturation point. The saturation point is where you will have a liquid-vapor mix, so superheat only exists when a substance is […]
Read more
In this episode of the HVAC School podcast, Bryan interviews Zach from Southeast Clean Air Solutions about the intricacies of professional duct cleaning. Zach specializes in addressing duct cleaning challenges specific to the Southeastern climate, with a particular focus on fiberglass-lined ducts. The conversation delves into the complexities of cleaning different types of duct […]
Read more
In this short podcast, Bryan talks about electric vehicles and whether EVs present an opportunity for HVAC technicians. The residential sales lead at Kalos recently mentioned that keeping an EV in a conditioned garage is advantageous, and it’s an upgrade we can offer our customers. In hot weather, EV battery performance and health can […]
Read more
The podcast delves into the world of HVAC chemical solutions through an in-depth conversation with Becca Stamey, the marketing director at Refrigeration Technologies. The discussion provides insights into the company’s unique approach to developing cleaning products, rooted in a commitment to safety, effectiveness, and customer feedback. Founded by John Pastorello, a chemist turned HVAC […]
Read more
In this short podcast, Bryan talks about evaporator coil placement based on a question submitted by a listener, John. Evap coil placement differs in furnace applications versus air handlers. When we use air conditioners with furnaces, we usually put evaporator coils on the positive side to protect the heat exchanger from rusting out during […]
Read more
In this episode of the HVAC School Podcast, Bryan interviews Zachary Ortwine, a duct cleaning professional who provides insights into ethical duct cleaning practices. The conversation delves deep into the complexities of cleaning different types of ductwork, the importance of proper assessment, and the potential challenges in maintaining indoor air quality. Zach emphasizes the […]
Read more
