Videos

There are many acceptable methods for making a wire splice and you need to consider many different factors when making a splice. Here are a few considerations. High Voltage vs. Low Voltage – If the connection is 24V or less it USUALLY has fewer NEC (National Electrical Code) rules and regulations about how the connections are […]

Reading CFM and Duct Velocity In this video, we cover the basics of using the Testo 510i with a pitot tube to do a duct traverse and easily calculate Velocity in FPM and volume in CFM on a small 8″ duct. Using this method is handy because you can use the reliable, accurate and inexpensive […]

In this video Jesse and Bryan demonstrate the creation of  a 3/8″ and 1/4″ flare on a ductless unit including – Reaming and Deburring Using a small amount of lubricant Making the flare, though we would suggest using a high quality orbital flare like THIS ONE Using a torque wrench to tighten to specs

There are a few important things that I suggest checking on every service call to reduce callbacks and increase customer satisfaction. One of them that often gets missed is preventing wire rub outs. One of my area managers and experienced tech Jesse Claerbout shot a video showing the simple step he takes to prevent major […]

In this video we cover Basic Motor Wiring Run, Common and Start legs Multi Speed motors and whether the speed taps are common, run or start The location of a thermal overload in a multi speed blower motor If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, […]

In this video we talk about – Common misunderstandings about blower relays How Blower relays connect to sequencers How Sequencers and other relays connect to electric heat Mistakes techs make that cause major damage and high power bills How to replace a blower board with a universal 90-340 relay If you have an iPhone, subscribe […]