2018

In this simultaneously heavy and lighthearted discussion, Bryan Orr and Andrew Greaves discuss ego, Dunning Kreuger, insecurity and apprenticeship in the trades. AK HVAC on YouTube – https://www.youtube.com/user/akgreaves

This article was written by Christopher Stephens. He is a commercial HVAC/R service manager in the greater Los Angeles area. Thanks, Chris. Let’s start by covering the three elements needed for a fire: fuel, air, and heat (spark). With those three elements in the right condition, you can start a fire. So, if we reduce […]

Measuring airflow is easy. Measuring airflow accurately is quite a bit more difficult. In many cases, when we as technicians measure airflow, we are trying to get to the almighty CFM (cubic feet per minute) volume measurement. You can take CFM readings fairly easily with a hood, like the Testo 420, but even a hood […]

In this short episode we review the basics of the refrigerant circuit. Compressor, Condenser, Metering Device and Evaporator Find out more at HVACRSchool.com

Jon Bennert from Air Oasis teaches us about PCO and Bi-Polar air purification and how it works.

  This article is written by Christopher Stephens of JVS Refrigeration in California, with just a few additions by me (Bryan) in italics. Thanks, Chris! Reach-in refrigerators are an interesting side of our industry, often looked at as frustrating and troublesome. Since we usually see reach-ins in kitchens or convenience stores, the refrigerators are never […]

A summary of reach in coolers (refrigerators), freezers and wine coolers with some mindset and technical tips

One of my techs (Jim Walch) brought another common “double trap”-style issue to my attention: techs and installers running a drain too far into a condensate pump. When you run the system drain too deep into the pump reservoir, the water level can rise high enough to cover the drain end. That can create the […]

Although there are various line lift, sizing, and trapping guidelines depending on oil and refrigerant type, there is one guideline we can all understand easily and remember to apply. This guideline is to slope suction lines towards condensing units/compressors. Keeping the suction line sloped toward the compressor, especially with long overhead lines, helps return the […]