Commercial HVAC & Refrigeration

If you are primarily a residential technician working on equipment under 5 tons, there are many similarities between the systems you are used to and 5-20 ton rooftop units common to the light commercial market. But there are also MANY additional things to consider on larger equipment, and here are just a few. Wash Fresh […]

Each commercial rooftop unit (RTU) needs to be mounted to a curb. A curb supports the RTU and provides openings for the supply and return ductwork (which can be massive compared to what we see in residential and light commercial HVAC). Occasionally, we’ll need to do an RTU changeout and put in a bigger or […]

This tech tip is based on a podcast with Andre Patenaude from Copeland. You can listen to that podcast episode HERE, and we encourage you to check out some of the resources at the end of this tech tip—whether you’re all in on ramping your team up for CO2 or just CO2-curious. Carbon dioxide (CO2) […]

This tech tip is based on a presentation by Joey Henderson, a veteran symposium speaker and excellent HVAC educator. You can learn more about Joey and the work he does at joejoehvac.com and his YouTube channel HERE. We recently published a tech tip about economizers as a means of bringing fresh air into commercial buildings. […]

Sandhill cranes are protected by the Migratory Bird Treaty Act (MBTA) of 1918. Non-migratory subspecies, like the ones we see in Florida, also have special protections, and hurting a crane can land you in jail or put you thousands of dollars in debt. (Plus, it’s just plain awful.) For that reason, we need to do […]

This article was written by Jennifer Manzo, an HVAC technician and the founder of HVA-Chicks Coalition. You can find her on social media as @HVAChicksjennifer. Thanks, Jennifer! It’s no secret that the HVAC industry is in the throes of an oversizing epidemic. Instead of stating the obvious, I wanted to take a deep dive into […]

Server rooms, sometimes called data rooms, are a somewhat unique situation in the HVAC trade with some special circumstances that should be considered. Here are a few tips for success when working on equipment for these spaces. Note: this article is focused on smaller server rooms that may use conventional or mini-split-type forced air equipment. […]

This article was written by Jeremy Smith CM, an experienced refrigeration tech and all-around great dude. Thanks, Jeremy. A very common means of control seen on refrigeration equipment is the pump down control. Why do we use this rather than just cycling the compressor off and on like a residential HVAC unit? Since most refrigeration equipment […]

Let's take a deeper dive into the magic that is gas defrost. Most techs who are familiar with heat pumps understand the basics of a gas defrost. When we apply this strategy to a larger system where we're only reversing a small part of the system, we need to add some controls and valves to […]