Videos

  This short video describes common open and short circuits in air conditioning and the difference as well as some discussion of tripping breakers and blowing fuses.     –Bryan

  This short video covers a common mistake techs make when they check voltage to ground.     –Bryan

  In part three we cover voltage measurement, loads and resistance in electrical circuits.     –Bryan

  How to setup the Testo 510 out of the box to use it for checking static pressure and gas pressure in inches of water column.     –Bryan

  Bryan covers more electrical basics, 240v circuits, 120v and 24v with the differences between L1, L2, Neutral, Common and Ground for HVAC/R and an introduction to schematics and ladder diagrams.     –Bryan

  We show step by step how to install a TXV in place of a piston on a Carrier system using the Danfoss TR6 TXV kit.     –Bryan  

  High glide refrigerants (Zeotropic) cannot be charged and diagnosed like typical R22 or R410 (Near Azeotropic). In addition to De and Bubble point, we must also understand when to use average or mid point saturation.     –Bryan  

  In this video, we go over the why and how to use the pipe wiper instead of flush solvents. You can find out more here http://www.a-jacksmanufacturing.com/product-page/commercial-pipe-wiper-kit and use the offer code “getschooled” for a discount     –Bryan

Splitting and Cleaning Condenser Coils If you have an iPhone, subscribe to the podcast HERE, and if you have an Android phone, subscribe HERE. Check out our handy calculators HERE.