Tech Tips

Every gas furnace data plate/tag has a specification for the temperature rise through that furnace. It is shown in a range like 50-80° or 45-75°. Those first two numbers are the lowest recommended temperature rise; the highest allowed temperature rise through the furnace is usually a 30° difference. When possible, we want to get the rise […]

Marley was dead, to begin with. There is no doubt whatever about that. That's the way Charles Dickens begins his “A Christmas Carol,” one of the most well-known pieces of literature in the modern world. A short story that can be read aloud in a few hours has to start memorably, and this one certainly […]

This gas furnace maintenance procedure in this article was developed by Michael Housh. Michael is the owner of Housh Home Energy in Ohio. He regularly works on natural gas equipment and is an active contributor to the HVAC School Facebook group. Thanks, Michael! Gas-fired equipment has a different set of components than your typical straight-cool […]

The Sleeper  The year was 2002, and I was 20 years old. I had a helper named Clay, and he was a really nice guy, probably 15 years my senior, already with streaks of grey in his hair with a way of making you feel at ease—so very at ease. OK, he was sleeping most […]

We have discussed many methods for checking a refrigerant charge without connecting gauges over the last few years. Recently, I've been thinking about the “approach” method of charging that many Lennox systems require. What is the Approach Method? The “approach” simply refers to the temperature difference between the liquid line leaving the condenser and the […]

This article was written by Don Gillis with Chemours. Thanks, Don! With the American Innovation Act (The AIM Act) in place and the reduction of the supply of hydrofluorocarbons (HFCs) in effect, the need to retrofit systems with lower global warming potential (GWP) refrigerants will become commonplace in the very near future. So, what does […]

I've heard the phrase, “It's too cold to set the charge!” for as long as I've been in the trade. I've also heard some variations of, “We need to come back and set the charge,” or, “We need to come back to do XYZ [some other thing].” Granted, there are cases where you do actually […]

A while ago, I walked up on one of our managers who was talking to a junior tech diagnosing an intermittent controls issue on a pool heat pump. In the background, you could hear an EXTREMELY loud compressor. The junior tech had just been moving some wires around, and the next thing he knew, there […]

Back in the “good old days,” controls were all analog and mechanical; that simply means they acted in a directly connected and variable manner based on a change in force. Both pneumatic (air pressure) and hydraulic (fluid pressure) systems are examples of mechanical or analog controls. When the pressure increases or decreases on a particular […]