Tools & Instruments

When most of us think about tools of the trade, a few main ones come to mind: manifold, multimeter, vacuum pumps, recovery machines… the list goes on. One that may NOT come up nearly as often as it probably should is the thermal imaging camera.  A few symposiums ago, Bill Spohn and Eric “Elk” Kaiser […]

If you have a multimeter for HVAC work, you most likely have a meter with a CAT III rating on it. Some might also be rated for CAT II at higher voltages or CAT IV at lower ones—or both, like this model of the UEi DL599 from our Multimeter 101 for HVAC 3D video. In […]

I'd like to give a special thanks to Tony Gonzalez from Fieldpiece for providing technical guidance about the SC680's power measurement capabilities, as well as VAC and AAC measurements on ECMs. You can learn more about the SC680 and other electrical meters on Fieldpiece's website. We’ve talked through specifications, applications, and features for a few […]

While gauge manifolds and manometers may only have one main function, some tools take several different measurements and will have more expansive specs. The combustion analyzer is one such example—combustion has so many elements, and we need something that can analyze the concentrations of several different substances as well as temperature.  As such, a combustion […]

Last week, we briefly looked at the spec sheet of a gauge manifold. All things considered, it was quite short; we only had to worry about the refrigerant types, pressure ranges, and hose diameters. However, manometers’ spec sheets are quite a bit longer than gauge manifolds’ because they have resolution and accuracy specs, among other […]

The original tools of the trade were all analog: electrical meters, gauges, and even manometers (Magnehelic, anyone?). However, digital tools have also become a staple of the skilled trades—where would most of us be without digital multimeters? And then probes also joined the fray with the rapid improvements to smartphone technology over the last 15–20 […]

As a small business owner in the 21st century, I have recently been exposed to the overwhelming amount of new technologies and processes that I could use within my business. In the last few years, there has been a surge of software and connected tools that are entering the marketplace. All of them promise to […]

Imagine this: you are pulling into your driveway from a long day at work, and you see a package waiting for you on your porch. You jump out of your truck and trip over the rose bush while running to see if this is what you have been waiting for. Upon closer inspection, you realize that the […]

Last year, I bought my first combustion analyzer. I had just started my own company and felt the additional weight of responsibility to sit down and determine the best way to verify that the furnaces I was servicing were working safely. In the past, the most extensive testing I had done was a visual inspection […]